Free Access
Issue
R.A.I.R.O. Recherche opérationnelle
Volume 7, Number V3, 1973
Page(s) 55 - 68
DOI https://doi.org/10.1051/ro/197307V300551
Published online 06 February 2017
  • A. CHARNES-GREENBERG, Plastic collapse and linear programming. Preliminary Report. Bulletin of the American Math. Soc, nov. 1951.
  • W. S. DORN-GREENBERG, Linear programming and plastic limit analysis of structures, An. Appl. Math., vol. 15, 1957. [MR: 92465] [Zbl: 0079.17305]
  • A. CHARNES-LEMKE-ZIENKIEWICZ, Virtual work, linear programming and plastic limit analysis, Proceeding of the royal Society, Series A, Math, and Phys. Sciences, May 1959. [Zbl: 0095.19701]
  • G. B. DANTZIG, Maximization of a linear function of variables subject to linear inequalities, Chap. 21, in : Activity analysis of production and allocation, NewYork, 1951. [MR: 56260] [Zbl: 0045.09802]
  • PRAGER, Lineare Ungleichungen in der Baustatik, , Schweizerische Bauzeitung 10 mai 1962.
  • TOCHER-POPOV, Plastic analysis of rigid frames by modified linear programming, Symposium on the use of computers in Civ. Eng., Lisbon, 1962.
  • MASSONNET-MAUS, Force portante plastique des systèmes de pieux, Symposium on the use of Computers in Civ. Eng., Lisbon, 1962.
  • WOLFENSBERGER-THURLIMANN, Untere Grenzwerte des Traglast von Platten, Bulletin C.E.B., n° 43, set. 1964,
  • CERADINI, C. GAVARINI, Calcolo a rottura e programmazione lineare, Giornale del Genio Civile, n° 1-2, 1965.
  • KOOPMAN-LANCE, On linear programming and plastic limit analysis, J. Mech Phys. Solids, March 1965.
  • CERADINI, C. GAVARINI, Some applications of linear programming to plastic analysis of structures, Int. Symp. the use of El. Dig. Comp. in St. Eng. Newcastle, July 1966.
  • C. GAVARINI, Fundamental plastic analysis theorems and duality in linear programming, Ingegneria Civile, n° 18, 1966.
  • C. GAVARINI, Plastic analysis of structures and duality in linear programming, Meccanica, n° 3/4, 1966.
  • LANCE, Duality in the finite difference method of plastic limit analysis, Report NSF GK 687/2, april 1967.
  • CERADINI et C. GAVARINI, Calcolo a rottura e programmazione lineare Continui bi e tridimensionali, Note I et II Giornale del Genio Civile, n° 2/3/4, 1968. [Zbl: 0211.52105]
  • C. GAVARINI, Calcolo a rottura e programmazione non lineare, Ist Lombardo (Rend. Sc.), A 102, 1968. [Zbl: 0211.52105]
  • CERADINI, Un principio di massimo per il calcolo dei sisterni elasto-plastici, Ist.Lombardo (Rend. Sc), 1965. A maximum principle for the analysis of elastic plastic Systems, Meccanica, n° 3/4, 1966. [Zbl: 0161.21902]
  • CERADINI, Sul calcolo delle strutture elastoplastiche, Nota I e Nota II, Costruzioni Metalliche, n° 3 e 5, 1965.
  • MAIER, A quadratic programming approach for certain classes of non linear structural problems, Meccanica, n° 2, 1968. [Zbl: 0165.28502]
  • MAIER, Quadratic programming and theory of elastic-perfectly plastic structures, Meccanica, n° 4, 1968. [Zbl: 0181.53704]
  • HODGE, Numerical applications of minimum principles in plasticity, Engineering Plasticity, Cambridge Un. Press, 1968. [Zbl: 0236.73067]
  • MAIER, Some theorems for plastic strain rates and plastic strains, Journal de Mécanique, n° 1, 1969, [Zbl: 0176.25901]
  • CAPURSO, A general method for the incremental solution of elastic-plastic problems, Meccanica, n° 4, 1969. [Zbl: 0213.28004]
  • CARPUSO-MAIER, Incremental elastoplastic analysis and quadratic optimization, Meccanica, n° 2, 1970. [Zbl: 0198.58301]
  • PALMER, Optimal structure design by dynamic programming, Proc. ASCE, St 8, 1968.
  • TOAKLEY, Optimum design using available sections, Proc. ASCE, St 5, 1967.
  • C. GAVARINI-VENEZIANO, On the safety domain of structures, 1° Convegno Nazionale di Meccanica Teorica ed Applicata, AIMETA, Udine, guigno 1971.
  • C. GAVARINI, Concezione probabilistica del calcolo a rottura, Giornale del Genio Civile, agosto 1969.
  • C. GAVARINI-VENEZIANO, Calcolo a rottura e programmazione stocastica. Giornale del Genio Civile, aprile 1970.
  • C. GAVARINI-VENEZIANO, Sulla teoria probabilistica degli stati limite delle strutture, Giornale del Genio Civile, n° 11/12, 1970.
  • VENEZIANO, Calcolo a rottura probabilistico con piu parametri casuali, Giornale del Genio Civile, n° 2, 1971.
  • C. GAVARINI-VENEZIANO, Minimum weight limit design under uncertainty, Meccanica, n° 2, 1972.
  • HODGE-BELYTSCHKO, Numerical methods for the limit analysis of plates, J. Appl. Mech., dec. 1968. [Zbl: 0172.52003]
  • G. P. McCORMICK, W. G. MYLANDER et A. V. FIACCO, Computer program implementing the sequential unconstrained minimization technique for non linear programming, Tech. paper RAC-TP. 151, Research Analysis, McLean, Va, 1965.
  • CASCIARO-DI CARLO, Formulazione dell' analisi limite delle piastre come problema di minimax mediante una rappresentazione agli elementi finiti del campo delle tensioni, Giornale del Genio Civile, n° 2, 1970.
  • CASCIARO-DI CARLO, Formulazione dell' analisi limite delle piastre corne problema di minimax, Giornale del Genio Civile, n° 5, 1971.
  • B. BEREANU, On stochastic linear programming, Distribution problems, Non stochastic technological matrix, Rev. Roumaine Math, pures et appl., tome XI, n° 6, 1966. [Zbl: 0161.17101]
  • S. VAJDA, Probabilistic programming, Academic Press, 1972. [MR: 343920]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.