Free Access
RAIRO-Oper. Res.
Volume 55, 2021
Regular articles published in advance of the transition of the journal to Subscribe to Open (S2O). Free supplement sponsored by the Fonds National pour la Science Ouverte
Page(s) S2773 - S2794
Published online 02 March 2021
  • P. Ahi and C. Searcy, A comparative literature analysis of definitions for green and sustainable supply chain management. J. Cleaner Prod. 52 (2013) 329–341. [Google Scholar]
  • A. Banerjee, A joint economic-lot-size model for purchaser and vendor. Decis. Sci. 17 (1986) 292–311. [CrossRef] [Google Scholar]
  • A. Banerjee and S. Banerjee, Coordinated order less inventory replenishment for a vendor and multiple buyers. Int. J. Technol. Manage. 7 (1992) 328–336. [Google Scholar]
  • A. Banerjee and J.S. Burton, Coordinated vs. independent inventory replenishment policies for a vendor and multiple buyers. Int. J. Prod. Econ. 35 (1994) 215–222. [Google Scholar]
  • D. Battini, A. Persona and F. Sgarbossa, A sustainable EOQ model: theoretical formulation and applications. Int. J. Prod. Econ. 149 (2014) 145–153. [Google Scholar]
  • M. Ben-Daya and A. Raouf, Inventory models involving lead time as a decision variable. J. Oper. Res. Soc. 45 (1994) 579–582. [Google Scholar]
  • Y. Bouchery, A. Ghaffari, Z. Jemai and Y. Dallery, Including sustainability criteria into inventory models. Eur. J. Oper. Res. 222 (2012) 229–240. [Google Scholar]
  • L.E. Cárdenas-Barrón, K.J. Chung and G. Treviño-Garza, Celebrating a century of the economic order quantity model in honour of Ford Whitman Harris. Int. J. Prod. Econ. 155 (2014) 1–7. [Google Scholar]
  • G. Cheng and L. Li, Joint optimization of production, quality control and maintenance for serial-parallel multistage production systems. Reliab. Eng. Syst. Saf. 204 (2020) 107–146. [Google Scholar]
  • C.J. Chung, An integrated production-inventory deteriorating model for pricing policy considering imperfect production, inspection planning and warranty-period-and stock-level-dependent demand. Int. J. Syst. Sci. 39 (2008) 823–837. [Google Scholar]
  • C.J. Conrad and N.H. McClamrock, The drilling problem: a stochastic modeling and control example in manufacturing. IEEE Trans. Autom. Control 32 (1987) 947–958. [Google Scholar]
  • B.K. Dey, B. Sarkar and S. Pareek, A two-echelon supply chain management with setup time and cost reduction, quality improvement and variable production rate. Mathematics 7 (2019) 328. [CrossRef] [Google Scholar]
  • B.K. Dey, B. Sarkar, M. Sarkar and S. Pareek, An integrated inventory model involving discrete setup cost reduction, variable safety factor, selling-price dependent demand, and investment. RAIRO:OR 53 (2019) 39–57. [CrossRef] [EDP Sciences] [Google Scholar]
  • B.K. Dey, S. Pareek, M. Tayyab and B. Sarkar, Autonomation policy to control work-in-process inventory in a smart production system. Int. J. Prod. Res. (2020). Doi: 10.1080/00207543.2020.1722325. [Google Scholar]
  • C. Gao, T.C. Cheng, H. Shen and L. Xu, Newdevelopments in stochastic models of manufacturing and service operations incentives for quality improvement efforts coordination in supply chains with partial cost allocation contract. Int. J. Prod. Res. 54 (2016) 6216–6231. [Google Scholar]
  • S.K. Goyal, An integrated inventory model for a single supplier-single customer problem. Int. J. Prod. Res. 15 (1976) 107–111. [Google Scholar]
  • S.K. Goyal, A joint economic-lot-size model for purchaser and vendor: a comment. Decis. Sci. 19 (1988) 236–241. [Google Scholar]
  • T. Hacking and P. Guthrie, A framework for clarifying the meaning of triple bottom-line, integrated, and sustainability assessment. Environ. Impact Assess. Rev. 28 (2008) 73–89. [Google Scholar]
  • M. Herva and E. Roca, Review of combined approaches and multi-criteria analysis for corporate environmental evaluation. J. Cleaner Prod. 39 (2013) 355–371. [Google Scholar]
  • C.K. Huang, T.L. Cheng, T.C. Kao and S.K. Goyal, An integrated inventory model involving manufacturing setup cost reduction in compound Poisson process. Int. J. Prod. Res. 49 (2011) 1219–1240. [Google Scholar]
  • J.K. Jha and K. Shankar, Single-vendor multi-buyer integrated production-inventory model with controllable lead time and service level constraints. Appl. Math. Model. 37 (2013) 1753–1767. [Google Scholar]
  • M. Khan, M. Hussain and H.M. Saber, Information sharing in a sustainable supply chain. Int. J. Prod. Econ. 181 (A) (2016) 201–214. [Google Scholar]
  • M. Khouja and A. Mehrez, Economic production lot size model with variable production rate and imperfect quality. J. Oper. Res. Soc. 45 (1994) 1405–1417. [Google Scholar]
  • C.J. Liao and C.H. Shyu, An analytical determination of lead time with normal demand. Int. J. Oper. Prod. Manage. 11 (1991) 72–78. [CrossRef] [Google Scholar]
  • J.D. Linton, R. Klassen and V. Jayaraman, Sustainable supply chains: an introduction. J. Oper. Manage. 25 (2007) 1075–1082. [Google Scholar]
  • L. Lu, A one-vendor multi-buyer integrated inventory model. Eur. J. Oper. Res. 81 (1995) 312–323. [Google Scholar]
  • A. Majumder, R. Guchhait and B. Sarkar, Manufacturing quality improvement and setup cost reduction in a vendor-buyer supply chain model. Eur. J. Ind. Eng. 11 (2017) 588–612. [CrossRef] [Google Scholar]
  • A. Majumder, C. Jaggi and B. Sarkar, A multi-retailer supply chain model with backorder and variable production cost. RAIRO:OR 52 (2018) 943–954. [Google Scholar]
  • A. Mehrez, O.F. Offodile and B.H. Ahn, A decision analysis view on the effect of robot repeatability on profit. IIE Trans. 27 (1995) 60–71. [Google Scholar]
  • O.F. Offodile and K. Ugwu, Evaluating the effect of speed and payload on robot repeatability. Rob. Comput.-Integr. Manuf. 8 (1991) 27–33. [CrossRef] [Google Scholar]
  • L.Y. Ouyang and C.K. Chen, Quality improvement, setup cost and lead-time reductions in lot size reorder point models with an imperfect production process. Comput. Oper. Res. 29 (2002) 1701–1717. [Google Scholar]
  • L.Y. Ouyang, N.C. Yeh and K.S. Wu, Mixture inventory model with backorders and lost sales for variable lead time. J. Oper. Res. Soc. 47 (1996) 829–832. [Google Scholar]
  • L.Y. Ouyang, K.S. Wu and C.H. Ho, Integrated vendor-buyer cooperative models with stochastic demand in controllable lead time. Int. J. Prod. Econ. 92 (2004) 255–266. [Google Scholar]
  • J.C.H. Pan and J.S. Yang, A study of an integrated inventory with controllable lead time. Int. J. Prod. Res. 40 (2002) 1263–1273. [Google Scholar]
  • E.L. Porteus, Optimal lot sizing, process quality improvement and setup cost reduction. Oper. Res. 34 (1986) 137–144. [Google Scholar]
  • M.J. Rosenblatt and H.L. Lee, Economic production cycles with imperfect productions processes. IIE Trans. 18 (1986) 48–54. [Google Scholar]
  • S.S. Sana, A production-inventory model of imperfect quality products in a three-layer supply chain. Decis. Support Syst. 50 (2011) 539–547. [Google Scholar]
  • B. Sarkar, Supply chain coordination with variable backorder, inspections, and discount policy for fixed lifetime products. Math. Prod. Eng. 14 6318737 (2016) 1–20. [Google Scholar]
  • B. Sarkar and A. Majumder, Integrated vendor-buyer supply chain model with vendor’s setup cost reduction. Appl. Math. Comput. 224 (2013) 362–371. [Google Scholar]
  • B. Sarkar, S.S. Sana and K.S. Chaudhuri, Optimal reliability, production lot size and safety stock in an imperfect production system. Int. J. Math. Oper. Res. 2 (2010) 467–490. [CrossRef] [Google Scholar]
  • B. Sarkar, A. Majumder, M. Sarkar, N. Kim and M. Ullah, Effects of variable production rate on quality of products in a single-vendor multi-buyer supply chain management. Int. J. Adv. Manuf. Technol. 99 (2018) 567–581. [Google Scholar]
  • B. Sarkar, M. Omir and N.H. Kim, A cooperative advertising collaboration policy in supply chain management under uncertain conditions. Appl. Soft Comput. 88 (2020) 105984. [Google Scholar]
  • S. Sarkar and B.C. Giri, Optimal ordering policy in a two-echelon supply chain model with variable backorder and demand uncertainty. RAIRO:OR (2020). Doi: 10.1051/ro/2020007. [Google Scholar]
  • S. Sarkar, B.C. Giri and A.K. Sarkar, A vendor-buyer inventory model with lot-size and production rate dependent lead time under time value of money. RAIRO:OR 54 (2020) 961–979. [CrossRef] [Google Scholar]
  • S.P. Sarmah, D. Acharya and S.K. Goyal, Coordination of a single-manufacturer/multi-buyer supply chain with credit option. Int. J. Prod. Econ. 111 (2008) 676–685. [Google Scholar]
  • S. Singh, N. Holvoet and V. Pandey, Bridging sustainability and corporate social responsibility: culture of monitoring and evaluation of CSR initiatives in India. Sustainability: Sci. Pract. Policy 10 (2018) 2353. [Google Scholar]
  • L. Wang, Z. Lu and Y. Ren, Joint production control and maintenance policy for a serial system with quality deterioration and stochastic demand. Reliab. Eng. Syst. Safety (2020) 106918. [Google Scholar]
  • Y.Y. Woo, S.L. Hsu and S. Wu, An integrated inventory model for a single vendor and multiple buyers with ordering cost reduction. Int. J. Prod. Econ. 73 (2001) 203–215. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.